Carpets, rugs and upholstery

As required dependent on soil and traffic. Suitable for regular use

Used as both a pre-spotter and stain remover to remove isolated stains and treat heavily soiled areas. For use with an extraction carpet cleaning machine for all over cleaning

Dilute 10mls per 1L of water for use though a carpet extraction cleaner.
Dilute 50mls per 1L of water for stain removal and pre- spotting heavily soiled areas.

Stain removal:

  • Patch test on an unseen area of textile to ensure colour fastness
  • If the stain is fresh and wet, absorb as much excess fluid as possible either by firmly applying pressure with a clean dry absorbent cloth or using an extraction carpet cleaner. Do not rub.
  • When the stain is as dry as possible, apply through a trigger spray as pre-diluted carpet cleaner directly onto the stain
  • Allow to dwell for 5 minutes
  • Do not rub! Apply pressure with a clean dry absorbent cloth. The stain will be suspended in the cleaner and removed onto the cloth. A carpet extraction cleaner can be used.
  • Repeat if required

High soil areas

  • Patch test on an unseen area of textile to ensure colour fastness
  • Apply using a trigger spray the pre-diluted carpet cleaner to heavily soiled area 5 minutes before cleaning using a carpet extraction cleaner
  • Pat into heavy soil using a damp cloth.
  • Do not rub

Carpet Cleaning

  • Do not exceed the recommended dilution and use as per the extraction cleaners instructions


Rubbing and damage to fibres as a result


Trigger spray or carpet extraction machine

Product Description
Pleasantly perfumed to assist with odours associated with carpets and upholstery. Neutral formulation designed to solubilise and suspend stains without damage. Low foam. Will not cause excessive fade or affect the majority of dye or pigment processes used. Patch testing always advised before application.